Check_mk does not show IPMI services, they are shown only in wato

#1

Hi,

I need to monitor an HP IPMI management board, without monitoring the server itself.

What I did is added a host with no agent,and no snmp but configured management board (IPMI).
Services of management board are shown in wato but not on services of host, so of course are not monitored.

Anyway I can achieve that?
Thanks

(Philipp Näther) #2

Please go to ~/var/check_mk/autochecks/HOSTNAME and post the output here.

#3

Please see below example of the iLO servers I’ve created:
[
(‘mgmt_ipmi_sensors’, u’C1_P2I_Bay_6\x00\x00\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’14-Chipset1_Zone’, {}),
(‘mgmt_ipmi_sensors’, u’20-PCI_#2\x00\x00\x00\x00\x00\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’06-P2_DIMM_1-6\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’C1_P1I_Bay_4\x00\x00\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’13-Chipset_1\x00\x00\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’30-VR_P2Mem_Zone’, {}),
(‘mgmt_ipmi_sensors’, u’41-Sys_Exhaust\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’Power_Supplies\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’37-System_Board\x00’, {}),
(‘mgmt_ipmi_sensors’, u’27-VR_P1Mem_Zone’, {}),
(‘mgmt_ipmi_sensors’, u’Fan_Block_3\x00\x00\x00\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’31-HD_Controller’, {}),
(‘mgmt_ipmi_sensors’, u’38-System_Board\x00’, {}),
(‘mgmt_ipmi_sensors’, u’Fan_Block_2\x00\x00\x00\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’09-P1_Mem_Zone\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’UID_Light\x00\x00\x00\x00\x00\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’C1_P1I_Bay_1\x00\x00\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’05-P1_DIMM_7-12\x00’, {}),
(‘mgmt_ipmi_sensors’, u’17-P/S_2_Inlet\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’04-P1_DIMM_1-6\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’C1_P2I_Bay_5\x00\x00\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’07-P2_DIMM_7-12\x00’, {}),
(‘mgmt_ipmi_sensors’, u’28-VR_P1Mem_Zone’, {}),
(‘mgmt_ipmi_sensors’, u’23-VR_P1_Mem\x00\x00\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’08-P1_Mem_Zone\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’36-PCI_2_Zone\x00\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’33-PCI_1_Zone\x00\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’Fan_Block_5\x00\x00\x00\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’16-P/S_1_Zone\x00\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’Fan_Block_7\x00\x00\x00\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’21-VR_P1\x00\x00\x00\x00\x00\x00\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’39-Sys_Exhaust\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’25-VR_P2_Mem\x00\x00\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’35-LOM_Card\x00\x00\x00\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’Power_Supply_1\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’Fan_Block_8\x00\x00\x00\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’34-PCI_1_Zone\x00\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’22-VR_P2\x00\x00\x00\x00\x00\x00\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’32-HD_Cntlr_Zone’, {}),
(‘mgmt_ipmi_sensors’, u’Memory\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’Sys.Health_LED\x00’, {}),
(‘mgmt_ipmi_sensors’, u’01-Inlet_Ambient’, {}),
(‘mgmt_ipmi_sensors’, u’26-VR_P2_Mem\x00\x00\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’24-VR_P1_Mem\x00\x00\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’Fan_Block_1\x00\x00\x00\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’10-P2_Mem_Zone\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’02-CPU_1\x00\x00\x00\x00\x00\x00\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’Power_Meter\x00\x00\x00\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’03-CPU_2\x00\x00\x00\x00\x00\x00\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’C1_P1I_Bay_2\x00\x00\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’Fan_Block_4\x00\x00\x00\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’Fans\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’29-VR_P2Mem_Zone’, {}),
(‘mgmt_ipmi_sensors’, u’11-P2_Mem_Zone\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’C1_P1I_Bay_3\x00\x00\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’18-P/S_2_Zone\x00\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’40-Sys_Exhaust\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’12-HD_Max\x00\x00\x00\x00\x00\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’19-PCI
#1\x00\x00\x00\x00\x00\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’Fan_Block_6\x00\x00\x00\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’Power_Supply_2\x00\x00’, {}),
(‘mgmt_ipmi_sensors’, u’42-SuperCAP_Max\x00’, {}),
(‘mgmt_ipmi_sensors’, u’15-P/S_1_Inlet\x00\x00’, {}),
]

#4

hopefully sent you what you needed, thanks :slight_smile:

#5

This could be because IPMI shows only Summery, how do I switch the check to detailed mode?