deepak8283 Trainee

  • Member since Nov 27th 2017
Posts
23
Points
130
Profile Hits
6
  • deepak8283

    Replied to the thread carbon-cache.
    Post
    vim /etc/icinga2/features-enabled/graphite.conf

    </>

    /**
    * The GraphiteWriter type writes check result metrics and
    * performance data to a graphite tcp socket.
    */

    library "perfdata"

    object GraphiteWriter "graphite" {
    // host = "127.0.0.1"
    // port =…
  • deepak8283

    Posted the thread carbon-cache.
    Thread
    I am trying to configure Graphite.

    Everything seems to be fine other that the carbon-cache service.
    </>

    root@dc1-monitoring:~# service carbon-cache status
    ● carbon-cache.service
    Loaded: masked (/dev/null; bad)
    Active: inactive (dead)


  • deepak8283

    Post
    Ohh.. really.
    So far I came to know only two verification commands which are available.
    Okay, will edit the verification file with the one available for the '2' and do a verification
    Thank you
  • deepak8283

    Post
    root@dc1-monitoring:/home/serveradmin# systemctl status npcd.service
    ● npcd.service - LSB: pnp4nagios NPCD Daemon Version 0.6.25
    Loaded: loaded (/etc/init.d/npcd; bad; vendor preset: enabled)
    Active: failed (Result: exit-code) since Thu 2017-12-07…
  • deepak8283

    Post
    </>

    service_perfdata_file=/usr/local/pnp4nagios/var/service-perfdata
  • deepak8283

    Post
    </>

    service_perfdata_file=/usr/local/pnp4nagios/var/service-perfdata
  • deepak8283

    Post
    I have tried to check the process_perfdata.
    Then the file permissions.

    And the file listed under:
    /usr/local/pnp4nagios/...

    /usr/local/nagios/...
    /usr/local/icinga/...

    I am lost.. Because the both the verification commands throws "All good"
    Is it…
  • deepak8283

    Post
    root@dc1-monitoring:/home/serveradmin# perl verify_pnp_config -m bulk+npcd -c /usr/local/icinga/etc/icinga.cfg -p /usr/local/pnp4nagios/etc/
    [INFO] ========== Starting Environment Checks ============
    [INFO] My version is: verify_pnp_config-0.6.26-R.40…
  • deepak8283

    Post
    See, I am not ignoring, I am trying to figure it out.
    Please come up with some suggestions, what could be making npcd not work.
  • deepak8283

    Post
    root@dc1-monitoring:/home/serveradmin# perl verify_pnp_config -m bulk+npcd -c /usr/local/icinga/etc/icinga.cfg -p /usr/local/pnp4nagios/etc/
    [INFO] ========== Starting Environment Checks ============
    [INFO] My version is: verify_pnp_config-0.6.26-R.40…
  • deepak8283

    Post
    Thank you for the last post.
    After that I made a research on the data flow of the Total Scenario and now the picture is more clear.
    Could you please assist me on the reported issue mentioned below




    [INFO] Nagios config looks good so far
    [INFO] …
  • deepak8283

    Post
    Alright. So now could you tell me the file which you wanna check to figure out what could be the issue.
    As I said, still I am not getting the curves drawn in the Graph-Background.



    vim /etc/default/rrdcached

    # Full path to daemon
  • deepak8283

    Post
    Again...
    I am out of that error.
    Th right file to edit was :
    /etc/icingaweb2/modules/pnp/config.ini

    But still I not getting the curves drawn in the Graph-Background.

    Also I am getting an error while trying to restart the service "carbon-cache"

    Failed…
  • deepak8283

    Post
    My perfdata Directory is /usr/local/pnp4nagios/var/perfdata/

    In the modules as you said, I found the file which mention the .pnpinternal, which is


    /etc/icingaweb2/modules/pnp/application/controllers/IndexController.php

    class IndexController extends…
  • deepak8283

    Post
    Thankyou.


    Now I got the Graph background displayed, but still the above error message is poping up.
    Also, in the graph, the curves are not displayed.
  • deepak8283

    Post
    What are the configurations I need to share?
    I am running an Icingaweb2 with modules Director working fine
    I am just trying to install pnp4nagios
  • deepak8283

    Thread
    pnp4nagios not displaying graph
  • deepak8283

    Post
    I am looking forward to go with icinga2 only.
    But still I have the Icingaweb2 enabled and Director module also installed
  • deepak8283

    Post
    I am working around in this for last 2 weeks and where I lack, is I am still not able to figure out how the files are linked.
    I have icingaweb2 working fine and I got Director module installed.

    In case of the pnp4nagios module, which one is the main…
  • deepak8283

    Post
    Oh sorry...
    I forgot the rule "</>"
    Next time I will follow